Informasi COVID-19: Proses perkuliahan jurusan ini dimulai secara online dan akan berlanjut di kampus. Baca informasi lengkapnya di sini.

Apa yang akan saya pelajari?

Degrees are granted in Chemical Engineering, Materials Engineering, Process Control and Welding Engineering. Welding Engineering is not available at the doctoral level. The MEng degree is intended primarily for part-time students who are working in industry, but can also be taken by full-time students.

General fields for research in chemical engineering include fluid mechanics and rheology; reaction kinetics and catalysis; mass transfer and separation processes; heat transfer; thermodynamics, hydrocarbon P-V-T and phase equilibrium studies; polymer reactor engineering; computer process control; dynamic simulation; biotechnology, mathematical modelling and environmental engineering. Many research programs are oriented toward better utilization of natural resources in the province, e.g., upgrading of Athabasca bitumen and heavy oil feedstocks; processing of natural gas.

Active research areas in materials engineering include mineral processing; coal preparation; modelling and simulation; intelligent processing of materials and solidification processing; hydrometallurgy; pyrometallurgy; high temperature electrochemistry; corrosion; physical and mechanical metallurgy; process metallurgy; welding metallurgy; powder metallurgy; ancient materials; ceramic materials; and electronic materials. Active research areas in chemical process control include dynamic modeling, state and parameter estimation, model predictive control, fault monitoring and diagnosis and process optimization.

The Department offers PhD degrees with specializations in Chemical Engineering, Process Control, and Materials Engineering.

Coursework (★20.5)

Six ★3 courses which must be approved by the Associate Chair (Graduate).

At least three courses must be 600-level or higher courses in the Department of Chemical and Materials Engineering. The following courses are considered to be equivalent to 600-level CME courses:

ECE 540
ECE 560
ECE 561
ECE 760
ECE 662
ECE 664
ECE 665
ENG M 646
MEC E 615

The remaining three courses must be at the 500-level or higher in the Faculty of Engineering, or be at the 400-level or higher in a Science department. Science courses at the 400-level must be approved by the Associate Chair (Graduate). The following courses are considered to be equivalent to 500-level Engineering courses:

ECE 450
ECE 457

Students specializing in Materials Engineering must take MAT E 640 - Advanced Materials Thermodynamics as one of their three 600-level courses
Reading courses will not count towards the total course requirements.
Students may be eligible for a Department course exemption if they have previously completed a recognized graduate degree program at an accredited university

ENGG 600 (★0.5)- Engineering Ethics and Integrity
CME 600 (★2) – Introduction to Research Methods. This course must be completed in the first year in the doctoral program.

Thesis

Registration in 900-level THES. Students are required to complete a thesis which embodies the results of independent research. All PhD students are required to deliver one public presentation on their research.

Length of Program

The maximum time to complete the PhD program as set by the Faculty of Graduate Studies and Research is six years.

Saya termasuk departemen apa?

Faculty of Engineering

Pilihan kuliah

Purna Waktu (6 tahun)

Biaya kuliah
CAD$9.465,00 (Rp 102.750.180) per tahun

* Biaya yang tercantum di halaman ini untuk tujuan indikatif, silahkan baca informasi resmi dari universitas bersangkutan

Tanggal mulai

11 Januari 2021, 1 September 2021

Tempat

Faculty of Engineering

Donadeo Innovation Centre,

9211-116 Street NW,

EDMONTON,

Alberta (AB),

T6G 1H9, Canada

Persyaratan masuk

Untuk mahasiswa dari Indonesia

Applicants are normally required to have completed a master’s degree, or its academic equivalent, from an academic institution recognized by the University of Alberta. An admission grade point average of 3 on most 4-point grading systems or B on most letter grading systems, based on your most recent two years of full-time study (or equivalent) is required. English Language Requirements: Test of English as a Foreign Language (TOEFL) - Minimum score of 550 (paper-based), or a total score of 88 with a score of at least 20 on each of the individual skill areas (internet-based); Michigan English Language Assessment Battery (MELAB) - Minimum score of 85; International English Language Testing System (IELTS); Minimum overall band score of 6.5, with at least 5.5 on each band (Academic); Canadian Academic English Language Assessment (CAEL) - Overall minimum score of 60, with at least 60 on each subtest; Pearson Test of English Academic (PTE Academic) - Overall minimum score of 59.

Untuk mahasiswa internasional

Students applying to a PhD program directly from a BSc must have an average of at least 3.5 on a four-point scale in the last ★60 or two years of undergraduate or graduate work at the University of Alberta, or an equivalent qualification from a recognized institution.

Students with a Masters' degree in Chemical or Materials Engineering (or a related discipline) are only eligible for admission into the PhD program.

English Language Proficiency

  • a minimum TOEFL score of 92 (internet-based) with at least 20 in each section or equivalent
  • an overall band score of 7.0 on IELTS with at least 6.0 on each band
  • a minimum score of 90 on MELAB
  • a minimum overall score of 65 on the CAEL with at least 60 on each subtest
  • a minimum score of 62 on the PTE Academic.

For Fall (September) admission, the application deadlines are April 1, For Winter (January) admission, the application deadlines are October 1.

Tentang universitas ini

University of Alberta termasuk 100 besar universitas terbaik di dunia, dengan prospek kerja lulusan tertinggi kedua di Kanada.

  • Edmonton adalah kota modern yang dikelilingi pemandangan alam
  • Lima besar universitas di Kanada
  • 18 fakultas di lima kampus
  • Salah satu prospek kerja lulusan tertinggi di Kanada