Informasi COVID-19: Proses perkuliahan jurusan ini dimulai secara online dan akan berlanjut di kampus. Baca informasi lengkapnya di sini.

Apa yang akan saya pelajari?

Degrees are granted in Chemical Engineering, Materials Engineering, Process Control and Welding Engineering. Welding Engineering is not available at the doctoral level. The MEng degree is intended primarily for part-time students who are working in industry, but can also be taken by full-time students.

General fields for research in chemical engineering include fluid mechanics and rheology; reaction kinetics and catalysis; mass transfer and separation processes; heat transfer; thermodynamics, hydrocarbon P-V-T and phase equilibrium studies; polymer reactor engineering; computer process control; dynamic simulation; biotechnology, mathematical modelling and environmental engineering. Many research programs are oriented toward better utilization of natural resources in the province, e.g., upgrading of Athabasca bitumen and heavy oil feedstocks; processing of natural gas.

Active research areas in materials engineering include mineral processing; coal preparation; modelling and simulation; intelligent processing of materials and solidification processing; hydrometallurgy; pyrometallurgy; high temperature electrochemistry; corrosion; physical and mechanical metallurgy; process metallurgy; welding metallurgy; powder metallurgy; ancient materials; ceramic materials; and electronic materials. Active research areas in chemical process control include dynamic modeling, state and parameter estimation, model predictive control, fault monitoring and diagnosis and process optimization.

The MEng is a course-based program. The Department offers MEng degrees with specializations in Chemical Engineering, Process Control, Materials Engineering, and Welding Engineering.

Program Requirements

Students must complete ten courses (★27.5), including a ★3 project course.

Coursework (★24.5)

Eight ★3 graduate-level courses. The courses are of the same type and calibre as those taken by the MSc and PhD candidates, and must be approved by the Associate Chair (Graduate).

At least four courses must be taken from the Department of Chemical and Materials Engineering
At least three of the CME courses must be at the 600-level or higher. The following courses are considered to be equivalent to 600-level CME courses:

ECE 540
ECE 560
ECE 561
ECE 760
ECE 662
ECE 664
ECE 665
ENG M 646
MEC E 615

The balance of the courses must be at the 500-level or higher in the Faculty of Engineering.

ENGG 600 (★0.5)- Engineering Ethics and Integrity

Project Course

CME 900 (★3) - Directed Research. The project is intended to apply knowledge learned during a students' program to a technical challenge (industrial/research) or a critical review of literature. The topic will be developed by the student in consultation with the project supervisor.

Saya termasuk departemen apa?

Faculty of Engineering

Pilihan kuliah

Purna Waktu (6 tahun)

Biaya kuliah
CAD$10.500,00 (Rp 113.985.937) per tahun

* Biaya yang tercantum di halaman ini untuk tujuan indikatif, silahkan baca informasi resmi dari universitas bersangkutan

Tanggal mulai

11 Januari 2021, 1 September 2021

Tempat

Faculty of Engineering

Donadeo Innovation Centre,

9211-116 Street NW,

EDMONTON,

Alberta (AB),

T6G 1H9, Canada

Persyaratan masuk

Untuk mahasiswa dari Indonesia

Applicants are normally required to have completed a four-year baccalaureate degree, or its academic equivalent, from an academic institution recognized by the University of Alberta. An admission grade point average of 3 on most 4-point grading systems or B on most letter grading systems, based on your most recent two years of full-time study (or equivalent) is required. English Language Requirements: Test of English as a Foreign Language (TOEFL) - Minimum score of 550 (paper-based), or a total score of 88 with a score of at least 20 on each of the individual skill areas (internet-based); Michigan English Language Assessment Battery (MELAB) - Minimum score of 85; International English Language Testing System (IELTS); Minimum overall band score of 6.5, with at least 5.5 on each band (Academic); Canadian Academic English Language Assessment (CAEL) - Overall minimum score of 60, with at least 60 on each subtest; Pearson Test of English Academic (PTE Academic) - Overall minimum score of 59.

Untuk mahasiswa internasional

The Department's minimum admission requirements are an undergraduate degree with an admission GPA of at least 3.0 on the 4-point scale from the University of Alberta, or an equivalent qualification and standing from a recognized institution. The admission GPA will be calculated on the last 60 of graded coursework completed, or on the equivalent of the last two years of full-time graded coursework.

  • a minimum TOEFL score of 92 (internet-based) with at least 20 in each section or equivalent
  • an overall band score of 7.0 on IELTS with at least 6.0 on each band
  • a minimum score of 90 on MELAB
  • a minimum overall score of 65 on the CAEL with at least 60 on each subtest
  • a minimum score of 62 on the PTE Academic.

For Fall (September) admission, the application deadlines are April 1, For Winter (January) admission, the application deadlines are October 1.

Tentang universitas ini

University of Alberta termasuk 100 besar universitas terbaik di dunia, dengan prospek kerja lulusan tertinggi kedua di Kanada.

  • Edmonton adalah kota modern yang dikelilingi pemandangan alam
  • Lima besar universitas di Kanada
  • 18 fakultas di lima kampus
  • Salah satu prospek kerja lulusan tertinggi di Kanada